3.The Process of 3D Ploystyrene combined Board :
3d panel is a prefabricated Three Dimensional Lightweight Structural panel consisting of a super-insulated polystyrene core sandwiched between two engineered layers of 10 ga Steel welded wire fabric mesh. To complete the panel form process a 10 ga Steel wire truss is pierced completely through the polystyrene core and welded to each of the outer layer sheets of 10 ga Steel welded wire fabric mesh
4.Application of 3D Ploystyrene combined Board :
3D Panel - an alternative building system that uses prefabricated polystyrene panels with wire mesh that becomes a structural wall when concrete, gunite, cement, plaster or stucco are shotcrete into place. Unlike other building systems, 3D Panel is an environmentally friendly - recycled green product.
The 3D Panel building system has tremendous flexibility - it can be used in place of wood or metal-framed walls, masonry block walls or pre-cast panels. It is an excellent structural system that can be used in floors, ceilings, and roofs. The 3D Panel building system saves construction time while providing greater structural integrity.
USED For WALL - FIRMED STRUCTURE
5 .The Packing & Shipping of 3D Ploystyrene combined Board :
- 3D PANEL - BECASUE BIG SIZE -REASONABLE CONTAINER -40 FEET ( 270 PIECES AROUND )
- BULK OR PALLET OR DO AS PER CUSTOMER
6.Benefits of 3D Ploystyrene combined Board ::
- Thermal Insulation
The EPS squeezing foaming polystyrene, a famous material of thermal insulation, is widely used to reduces the loss of heat in construction. Whether in hot summer or cold winter, 3D panels do help room temperature remain at a comfortable degree.
- Fireproofing
It has passed the 120 minutes fireproofing test by National Construction Institute and also been approved as the fireproofing material for internal & external construction stuffs.
- Moisture proofing
As we have used the high performance foaming polystyrene 100m/m of water absorption, it shows an excellent prevention against the condensation on the wall. (As for the usage of external wall, the exterior on the external wall needs the waterproofing mortar.)
- Soundproofing
With regard to sound insulation, 3d panel shows a distinguished feature of soundproofing among other materials. Besides, it shows a stronger capability of sound proofing with both sides plasterboard.
- Lightweight
Equal volumes of 3d panels and masonry wall, the former only weighs a quarter of the latter. Using a 3d panel can significantly alleviates the fixed load of structure and also highly be recommended for the enlargement of old buildings.
- Structure
It is used for every construction like residence and apartment. Especially, it is highly recommended the higher the building is and the longer its span is.
- Variety
The panels can be designed in a varied forms without any professional knowledge, and fits for the round-typed materials as increasing 10% indoor space compared with masonry structure.
- Economical Efficiency
As a standardized factory product, 3d panels are easy to install, and allows us to execute the masonry, insulation, plastering at the same time, which surely reduces the construction time down to a third.
- Shortening of Construction Time
Easy installation of 3d panels can reduce the cost of labor and construction expenses.
