Agitation Tank Vibrating Screen Mesh        

We are professional in offering a quality proven range of Vibrating Screen Mesh for that is designed with last technology and quality raw material.   

 Our series of Vibrating Screen Mesh  can be divided into without hook, with hook ,over lap .The products is incompliance with the standards of ISO,CE,SGS.

Information 

Melting facilities: Medium frequency electric induction furnace/electric arc furnace. 
Casting Inspection: Direct-reading spectrum instrument, metallographic analysis, ultrasonic inspection, magnetic particle inspection, mechanical properties inspection. 
Heat treatment facilities: Special heating electric furnaces, special water pools etc. Special quenching equipments. 
Surface treatment: Shot blast cleaning. 

Characteristic :

1,Precision mesh opening and good sieving effect.

2,Good abrasion resistance and a long service life.

3,Smooth surface and stable structure.

4,Pre-bending process and good tensile strength.

Products

WEAVING TYPES OF VIBRATING SCREEN 

EDGE TYPES OF VIBRATING SCREEN 

Products Daily maintenance: 

1. Before running

 (1) to check coarse mesh and fine mesh if there is a damage.(2) each group clamps is locking.

 2.Running

 (1)notice any abnormal noises.(2)electric current is stable. (3)whether the vibration is abnormal.

 3. After running

 (1)after used clean up the vibration every time.

 (2) inspect regularly the coarse mesh, fine mesh and the spring if there are fatigue and damage.

 (3)whether each part of the vibrating body caused damage due to vibration.

 (4)need to add the site to be the lubricating oil. 

Quality Requirement:

Mesh aperture tolerance: -3%~3%

Wire diameter:-0.03mm~3mm

Wire spur:>wire diameter,<half of an aperture

Diagonal deviation:(1) for the narrow and long, wide and long mesh (length > 2m), allows the diagonal error between 0 - 12mm;

                            (2) for short, wide and short mesh (length < 2m), allows the diagonal error between 0 - 9mm;

Mesh tightness judgment: pinch wire head weft, weft wire to ensure at the edge of a slide in the second warp filaments without sliding as appropriate, if not the net surface in boundary screw tight.

Do not allow the quality defects: the wrong size, not straight Jingwei, uneven net surface, loose net surface , too tight mesh net surface, exceed standard, jump flower short head.

 According to the working requirement of precise cutting of products.

Check the diagonal and mesh size and then eliminate substandard products.   

Aplication :

They have got high application in following :

Power plants

Chemical

Coal mining

Paper and pulp

Quarrying

Cement and stone crushing

Iron ore and steel industry         

contact us :

Sales manager : alisa

E-mail:alisawiremesh@hotmail.com

Mobile : +86 18730291422